Graugear G-M2HP04-F NVMe Cooler Review: Two heatpipes and a fan deliver strong performance

Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.

Cooler specifications

Packing and included contents

The packaging is fairly simple, with the cooler arriving in a small box just large enough to contain the product. Included in the box is the heatsink and fan, the base, two sets of thermal pads, a screwdriver, and documentation.

Features of Graugear’s G-M2HP04-F

▶️ Two copper heatpipes

The first thing that sets Graugear’s heatsink apart from the competition is its incorporation of two 5mm copper heatpipes.

▶️ Aluminum fins, like a mini CPU cooler

The copper heatpipes of the SSD cooler connect to aluminum fins, much like a mini CPU cooler. In fact, with a little bit of tinkering, one could adapt this product to cool a low-power CPU!

▶️ Active 25mm fan

But heatpipes and aluminum fins aren’t the only tools this Graugear SSD heatsink uses to keep your drive cool – it also features a small 25mm fan to push heat away from your NVMe drive.

Testing configuration and methodology – LGA1700 platform

Today’s review will be the last of a heatsink tested on my last-generation platform, which was limited to PCI- 4.0 speeds. To test the effectiveness of a SSD heatsink or cooler, I run a custom IOMeter script that stresses both the SSD’s controller and NAND. The SSD heatsink is installed in the M.2 slot next to the CPU, which is cooled by an AIO.

Cooling an SSD on a PCIe 5.0 system can be more difficult, and whether your CPU is cooled by an AIO or air cooler can impact the performance of SSD heatsinks. To see how this might impact results, I encourage you to visit my recent review of iHTP’s SSD heatsink – which features testing on a modern Arrow Lake platform that supports PCIe 5.0 speeds, and has tests performed with both an air cooler and AIO cooler.

Please keep in mind that if you’re wondering if you need an aftermarket SSD heatsink at all, the answer is likely “no.” These types of devices will be most useful for those users who have storage and IO-intensive workloads in an environment with a high ambient temperature, like servers. For most common users, the benefit of a stronger SSD heatsink will be limited to increasing the longevity of your SSD.

Heatsink Installation

The installation of an SSD heatisnk is simple, and if you’ve seen one you’ve basically seen them all. There’s very little variance in installation procedures, due to the similarities of these units.

1. Take the base of the unit and apply the first thermal pad. Then place the SSD on top of the first thermal pad.

2. Place the second thermal pad atop the SSD.

3. Place the heatsink above the top thermal pad, and then secure it with the included screws.

4. Finally, place the unit into an M.2 slot on your motherboard and then connect the PWM cable. I’ve installed this unit in the slot between my GPU and CPU cooler, but you may need to use another slot if you have a particularly wide air cooler.

• Marlin1975

  If my hard-drive requires that much maybe I should buy another brand.
  I am in the process of building a new computer. Heat/power from the NVME was one of the reasons I choose 1 drive over others.

  Reply