Razer DeathAdder V3 HyperSpeed: Two-minute review
The Razer DeathAdder V3 HyperSpeed is a wireless gaming mouse in Razer’s asymmetrical range with pro-level play in mind. It adopts a small and sleek form, with an offset shape that slopes away to the right, giving it a more ergonomic feel. It’s relatively small too, especially across its width, although it’s the same length as a typical full-size pointer.
At a mere 55g, the DeathAdder V3 HyperSpeed is very light – but it’s far from flimsy: Razer’s typically high standards are adhered to, and it feels robust.
The chassis material feels premium too, and although it’s not textured, the finish offers just enough grip on its own without requiring grip tape – which is convenient since none is included.
The buttons and scroll wheel also feel solid yet are as easy to operate as any of the best gaming mice, providing satisfying feedback. The texturing on the latter is a particular highlight, with its dotted design appealing to me more than the linear grooves you typically find on many other gaming mice.
Underneath the DeathAdder V3 HyperSpeed are two large PTFE skates (no spares are included), which cover a large surface area and offer very smooth glides. They aren’t thick enough to use on hard surfaces – but stick to using it on pads and you’ll be rewarded with effortless movements.
The USB-C cable included with the DeathAdder V3 HyperSpeed is of a similarly high quality, although it isn’t braided like those included with some elite gaming mice. It’s also not long enough to be practical for wired play; and even if your setup allows for it, it’s not light enough to prevent drag, although admittedly the effect isn’t as severe as with other non-braided cables.
The DeathAdder V3 HyperSpeed can be customized using Razer Synapse, the brand’s peripheral software. Here you’ll find many of the usual tweaks, with plenty of rebinding options for nearly every button, including the power and DPI selector underneath.
The left click isn’t rebindable unless you activate Razer’s Hypershift function, which allows you to designate one button as a modifier to give you access to a second layer of bindings.
Synapse also has some unique features for the DeathAdder V3 HyperSpeed, such as Dynamic Sensitivity, which lets you customize the curve for cursor acceleration based on the speed of your flicks. There’s also a setting for rotating the mouse’s angle to match the natural way you hold it, in order to help straighten horizontal movements.
Both of these will be useful to certain gamers I’m sure, but it’s a shame other advanced tweaks for the DeathAdder V3 HyperSpeed are missing, such as a slam click filter, lift-off distance adjustments, and an angle-snapping toggle.
Regardless of these omissions, however, the DeathAdder V3 HyperSpeed is still a joy to play with. It feels sharp and responsive, which combined with its smooth-as-silk gliding ability, allow for accurate aiming and frantic swipes equally.
I found the ergonomic shape comfortable as well, which I was pleasantly surprised by – I haven’t always gelled with mice of this ilk in the past, but the DeathAdder V3 HyperSpeed proved a natural fit for my hand and fingers.
What’s more, the mouse buttons were light enough for rapid clicks, yet stable enough to prevent misclicks. The side buttons were easy to access and actuate, while the scroll wheel felt easy yet secure to operate; I could middle click confidently without worrying about accidental flicks.
However, I did have an issue with the middle click, which felt a little awkward to press, failing to provide as much feedback as I would’ve liked. This resulted in inconsistent actuation, especially in the heat of the moment.
Thankfully, connectivity was consistent, and true to the HyperSpeed name, I experienced no issues with lag. It’s a shame, however, that there’s no Bluetooth option in addition to the 2.4GHz USB dongle, which would’ve improved its versatility for multi-device setups.
Razer claims the battery of the DeathAdder V3 HyperSpeed can last up to 100 hours when set to the maximum 1K polling rate (although 8K is possible with the optional HyperPolling dongle). Based on my tests, I can well believe this figure, as after several days, the battery dipped by only a few percentage points.
There’s no question the DeathAdder V3 HyperSpeed is an expensive gaming mouse, but its build quality and gaming prowess are excellent, and while the shape might not suit everyone, others will find it comfortable. A Pro version is available, which has a few upgraded specs, but the same basic form. Naturally, it’s more expensive.
If you want an even lighter gaming mouse, the Asus TUF Gaming M4 Air is about the best in this regard. It’s a great performer and considerably cheaper than the DeathAdder V3 HyperSpeed – although it lacks wireless connectivity.
Razer DeathAdder V3 HyperSpeed review: Price & availability
- $99.99 / £99.99 / AU$179.95
- Available now in black only
- Competitively priced
The Razer DeathAdder V3 HyperSpeed costs $99.99 / £99.99 / AU$179.95 and is available now in one colorway: black. It comes with a 2.4GHz HyperSpeed USB dongle and a USB-C-to-A cable. Razer’s HyperPolling dongle can be purchased separately to boost the maximum polling rate all the way up to 8K.
For a wireless gaming mouse, the DeathAdder V3 HyperSpeed veers towards the top-end of the market, but considering the quality on offer, it remains competitive. A Pro version is also available, which we rate as the best wireless gaming mouse overall, thanks to its performance and ergonomics – the latter of which it shares with the V3 HyperSpeed. It’s more expensive, though, and slightly heavier.
If you’re looking for an even lighter pointer than the DeathAdder V3 HyperSpeed, the Asus TUF Gaming M4 Air is a great alternative, as it tips the scales at a mere 50g. It’s also much cheaper than, but lacks wireless connectivity. Still, you can’t do much better than the M4 Air if you want powerhouse performance in a featherweight package.
Razer DeathAdder V3 HyperSpeed review: Specs
Swipe to scroll horizontally
Interface | Wireless (2.4GHz), wired (USB-C-to-A) |
Ergonomics | Right-handed asymmetrical |
Buttons | 6 |
DPI | Up to 26,000 |
Switches | Razer Optical Mouse Switches Gen-3 |
Weight | 1.9oz (55g) |
Should I buy the Razer DeathAdder V3 HyperSpeed?
Swipe to scroll horizontally
Value | The DeathAdder V3 HyperSpeed is undeniably expensive, but the price tag is reasonable relative to its like-for-like rivals. | 3.5 / 5 |
Design | The DeathAdder V3 HyperSpeed feels premium in every way, but while I found its shape comfortable, not everyone will. | 4 / 5 |
Performance | The buttons are fast and tactile, while it moves with plenty of speed and pinpoint accuracy. It lacks a few advanced tweaks, though. | 4.5 / 5 |
Overall | The DeathAdder V3 HyperSpeed is a very capable pointer, although the shape won't be for everyone. It's well-priced, and while there are plenty of great alternatives, it's still worth shortlisting. | 4 / 5 |
Buy it if...
You want something light
At 55g, the DeathAdder V3 HyperSpeed is certainly light, yet still retains a full-size length. It’s a little narrower than other gaming mice, though.
You want a semi-ergonomic shape
The rightwards slope of the DeathAdder V3 HyperSpeed is reminiscent of ergonomic mice, so some gamers might find it more comfortable to use.
Don't buy it if...
You want pro-level tweaking
Although Synapse is a capable piece of software, more advanced tweaks are missing for the DeathAdder V3 HyperSpeed, such as a slam click filter and LoD adjustments.
You’re left-handed
The DeathAdder V3 HyperSpeed is asymmetrical and only suitable for right-handers, so lefties will have to look elsewhere.
Razer DeathAdder V3 HyperSpeed review: Also consider
Swipe to scroll horizontally
Price | Wireless (2.4GHz), wired (USB-C-to-A) | Wireless (2.4GHz), wired (USB-C-to-A) | Wired (USB-C-to-A) |
Interface | Right-handed asymmetrical | Right-handed asymmetrical | Right-handed symmetrical |
Ergonomics | 6 | 6 | 6 |
DPI | 26,000 | 30,000 | 16,000 |
Switches | Razer Optical Mouse Switches Gen-3 | Razer Optical Mouse Switches Gen-3 | Kailh GM 4.0 |
Weight | 1.9oz (55g) | 2.2oz / 64g | 1.8oz / 50g |
Razer DeathAdder V3 Pro
The Pro version of the HyperSpeed has an upgraded sensor capable of a 30K DPI – 4K more than the HyperSpeed can manage. It also has faster IPS speeds and acceleration, although it’s almost 10g heavier and more expensive. Still, it’s simply the best wireless gaming mouse we’ve experienced. Read our Razer DeathAdder V3 Pro review.
Asus TUF Gaming M4 Air
The TUF Gaming M4 Air only weighs 50g, so if lightness is a priority for you, there aren’t many better. What’s more, we found its form very comfortable and its switches nice and responsive, if a little on the heavy side. We also rate it as the best mouse for CS:GO and CS2 in the lightweight category. What’s more, it’s considerably cheaper than the DeathAdder V3 HyperSpeed, although it’s wired-only. Read our Asus TUF Gaming M4 Air review.
How I tested the Razer DeathAdder V3 HyperSpeed
- Tested for several days
- Played games and browsed
- Plentiful PC gaming experience
I tested the DeathAdder V3 HyperSpeed for several days, during which time I used it for gaming and general browsing.
I played Counter-Strike 2, which is a stern test for any mouse, given it requires incredibly fast movements yet pinpoint accuracy when aiming.
I have been PC gaming for over a decade, and during that time I have experienced a great deal of mice ranging in price, size, and features. I have reviewed numerous models as well, including other Razer products.
- Read more about how we test
- First reviewed: April 2025
English (US) ·