Creality Pika 3D scanner review: Good things come in small packages

A 3D scanner is an amazing tool to add to your 3D printing workflow, allowing you to scan real-life objects to import into sculpting or CAD software, then print out your own modified copies on a 3D printer. In the past, a good scanner cost thousands of dollars, but Creality has finally given us a device within reach of hobby-level consumers. The Creality Pika is easy to use, with the look, feel, and size of a point-and-shoot digital camera. It can wirelessly tether to a mobile phone running a Creality scanning app, which makes scanning on the go easier than ever before.

It can also be tethered to a laptop wirelessly or with a cable for more stable scanning, but marker-free laser scanning can only be performed while physically tethered to a computer. The scanner runs on AA-sized rechargeable batteries, which are provided.

It weighs just 260 grams (just slightly over a half-pound) with the batteries installed, reducing arm fatigue when operating without a tripod. A tabletop tripod and manual turntable are included for scanning small items. While not as precise as Creality’s Sermoon series, the Creality Pika, currently on pre-order for $699, is a fraction of the price. The best part is that both use the same software, Creality Scan, which is excellent.

The Creality Pika’s portability and price make this one of the best scanners we’ve reviewed in 2026.

Specifications: Creality Pika

Included in the Box: Creality Pika

The Creality Pika comes with a very nice tripod. Also included are the glass calibration board, a manual turntable, marking blocks, batteries (including a spare), a generous pack of marking dots, and a mostly useless quick start guide. The Quick Start guide is just a packing list in eleven different languages and QR codes to Creality’s website and Facebook community.

Design of the Creality Pika

The Creality Pika is a small handheld scanner that weighs only 260 g with its battery. It has a 3-inch touch screen on the back that shows the scan in progress while paired to a phone or PC on Wi-Fi, or allows exposure and zoom adjustments when scanning via cord. There are two buttons on the top of the scanner for power and start/stop, and a selector switch for USB or Wi-Fi.

The scanner has a play button to start and stop scans, as well as a button to adjust the lights and a toggle for zoom. The front of the scanner has an RGB camera, two 3D scanning cameras, a DOE projector, a parallel-line laser, four blue and white fill lights, and four infrared fill lights. There is an always-on cooling fan with grills on the top and bottom of the scanner. Two batteries are included, which can be charged in the camera or via a USB-C port located near the top of the battery.

The batteries, curiously, have both positive and negative terminals on top of the battery. Care should be taken when carrying these to avoid shorting them together with anything metal in a purse or pocket.

Getting Started and Calibrating the Creality Pika

The Creality Pika uses a glass calibration board to do an initial calibration of the scanner. The calibration process involves holding the scanner above the board at various heights and at various angles. The process takes about ten minutes.

Installing the Software for Creality Pika

Creality Scan app can be downloaded from Creality's website, with versions for PC, Mac, Android, and iPhone. A really good user guide with links to tutorials and troubleshooting help is located on the Creality Scan homepage. The discovery tab has links to items scanned by other Creality users.

The Pika must be tethered by cable or Wi-Fi. Though the Pika does have an onboard 8-core 2.0 GHz CPU, it passes along a big chunk of computer processing to whatever it’s connected to. My iPhone 15 has just enough oomph to power the scanner, so you may have an even better experience with a newer device. Either way, using a wireless connection is slower, and using it with hardware near the minimum requirements can be frustrating.

My old laptop, with only 8GB of RAM, did not work, despite being enough to run previous scanners. Thankfully, my admittedly low-end gaming laptop, with 16GB of RAM, was good enough to run the scanner quite well. The software installed on the computer is used for both scanning and processing.

Creality Scan can export scans as STL, PLY, OBJ, or ASC files. These files can be tidied up in other modeling software or uploaded directly to your 3D printer’s slicer.

Blue Laser Line 3D Scanning with the Creality Pika

The Creality Pika uses blue laser line scanning for detailed geometry capture, with seven parallel laser lines. The provided manual turntable works well when plastered with a bunch of the included marker dots. Unfortunately, it has a few millimeters of play in the center bearing, which can lead to a rough surface texture if not careful.

The photo above shows the raw scan of a copy of Michelangelo’s David. I did get much better scans later, but even this one is easily made usable in the software. The first step is fusing the model, which allows you to remove the marker dots and noise from the scan.

After fusing, the model is much smoother. There are still some unattached pieces and holes, and the bottom of the model is not flat. The lasso tool can select and remove the unattached pieces, and a clipping plane can be generated by choosing markers surrounding the scan. The plane can then be raised or lowered to give you the best base of the model.

The next step is mesh processing of the model. In this step, you can further smooth the model, simplify it, and fill small holes shown in yellow. Don’t select “make watertight” if you have a large hole (like the bottom of a model), as it will cover the holes by ballooning out a good bit. After running the mesh processing, you will have another opportunity to simplify, smooth, and fill holes.

Use Plane type hole filling for large flat surfaces.

The final model: filled, smoothed, simplified, and ready to export for printing.

This bust of David came with an early Creality scanner, so I’ve been using it as a test model for some time now. This may be the best scan I’ve gotten of it. The main reason is that the Creality Pika is small and lightweight, and tracks well enough to scan the underside of David’s hair and chin for the most part. The software’s hole filling and smoothing did the rest, with phenomenal results.

The above image on the right was printed on the Prusa Core One L with Inland Bone White PLA. The model looks nearly perfect.

Since the Pika did so well with David, I decided to try a smaller model. This little guy (below) came with my kid’s Fisher-Price castle. He’s only 62 mm tall and was just too small to paint for 3D printing. He was also printed in Inland bone white on the Prusa Core One L.

Both the print and scan are nicely detailed.

I swiped my husband’s vintage Saint Louis University Billiken bobblehead for more tests. I had to put some sticky tack on his head to keep it steady on the turntable. Creality Scan did a terrific job smoothing out the wrinkles, and the model is perfect. I used the clipping plane to remove the logo of an old wireless company that provided the game day freebie. I gave it a quick coloring job in PrusaSlicer, but skipped doing the face.

The model was printed on the Prusa XL using Anycubic turquoise and orange PLA, with Creality white and black PLA.

NIR 3D Scanning with the Creality Pika

I spent a ton of time putting random dots on the included turntable, which made Blue light scanning a breeze. NIR 3D scanning doesn’t use them. Scanning a person seems to work well until you get hair involved. Then it gets dodgy.

I ran two good scans using NIR. This time I borrowed my husband to operate the scanner, since scanning yourself is a bit more difficult than taking a selfie. I stitched together two scans of my foot, which I’ll use later to size some TPU shoes. I was able to further clean up the scan in Nomad Sculpt, since the scan wasn’t very flattering. It works quite well for sizing, however. The shoes will turn up in a future printer review.

After the less-than-stellar scan he took of my head for the Creality Sermoon S1, my husband graciously volunteered to have me scan his head for this review. Using any of the modes available, hair just seems to flummox the scanner. Fortunately, my husband has less hair than I do, so the scan did complete, and no, I’m not going to 3D print it. 3D scans are quite brutal, but if he ever wants a custom driver for his Death Racer, we’re covered.

Bottom Line

The Creality Pika is a small and light, yet totally capable scanner. It needs a good mobile phone or fairly decent laptop to drive it. The software backing up the hardware is easy to use and really does an excellent job cleaning up the rough areas of your scans. Currently, it is available at a comparatively bargain-basement pre-order price of $699.

If you want a scanner with a little more horsepower, check out the Creality Sermoon S1, which retails for $2,069. Creality also makes the Sermoon P1, which can run completely untethered and retails for $3,299.