Why Your Portraits Look Soft Even With Great Gear

1 day ago 37

Soft eyes, a face that's slightly blurred, and skin that looks a little green in Lightroom are easy to overlook on a rear screen and hard to ignore once you're editing at full size. Most of those problems trace back to a handful of settings you choose before the shutter fires, plus one dropdown menu you may never have touched after import.

James Reader, who shoots his portraits on a Canon EOS R6 Mark III, starts with aperture and the habit of buying a fast prime, setting it to f/1.4, and leaving it there for every portrait. Wide open has its place. He reaches for f/1.2 or f/1.4 when he wants something soft and almost painterly, such as shooting through long grass that melts into soft shapes around a subject, or when a dull location needs to disappear behind distance and blur. Depth of field also shrinks as you move closer, so a tight headshot at f/1.2 may hold only the nearer eye in focus while the other drifts soft. Sometimes that's exactly the look he wants, and when it isn't, he stops down, using framing as his starting point: roughly f/1.2 to f/2 for full-length shots, around f/2 for mid-length, and f/2.8 to f/5.6 for close headshots.

Those numbers bend as soon as the shot asks for something else. Fashion work, where texture in the clothing carries the image, can push him to f/8 at any framing, and studio portraits get stopped down for detail since there's no background worth blurring. Environmental and travel portraits sit around f/2.8 to f/4, enough separation to lift the subject while keeping a location you worked hard to reach recognizable. Focal length shifts the math too, since an 85mm prime magnifies the background and blurs it more than a 35mm prime at the same framing and aperture. His way of building instinct is simple: study portraits you admire, look at how the background falls away, and guess the aperture.

Soft portraits usually fail in one of three ways, and Reader's diagnosis is useful on its own. If everything is soft, background and all, it's camera shake. If the background is crisp and the subject isn't, the subject moved. If the ear or the eyelashes are sharp and the eyes aren't, focus missed, and no shutter speed will rescue that frame. For posed subjects, he works at 1/250 s or faster, because the small movements people make while standing still start to show below that, and in-body stabilization counters your movement while doing nothing for theirs. A model who changes poses quickly gets 1/500 s to freeze hands and hair, and running subjects or fast-walking fashion shots get 1/1,000 s when the light allows.

Shutter type is where Reader sees the most confusion among people with excellent gear and soft files. A fully mechanical shutter can produce a tiny vibration called shutter shock, often around 1/200 s or 1/250 s, and it shows when you crop in to 100%, especially on a high-resolution body like the Canon EOS R5 or a crop sensor body like the EOS R7. When people tell him they can't get sharp photos despite great cameras and lenses, this is often the culprit. He uses electronic first curtain up to 1/1,000 s and switches to mechanical above that, since electronic first curtain can make out-of-focus highlights look uneven or clipped at fast speeds. Fully electronic shutter stays off for nearly all of his work, since moving subjects can skew, certain artificial lights can band, and on his R6 Mark III it drops raw files to 12-bit. He also exposes about a third of a stop darker than the meter suggests, and up to a full stop under when the sun sits behind his subject, since a blown highlight is gone for good while raw shadows lift with ease.

He shoots full raw rather than Canon's compressed C-RAW. The smaller files are about half the size, and in most tests the difference is hard to see, but since he often underexposes and lifts the shadows later, he'd rather keep every bit of information. For focus, he uses servo AF with back-button focus, sets subject detection to people with eye detection on, and leaves the camera in whole-area AF about 90% of the time. With more than one person in the frame, such as a bride with her bridesmaids, he moves to a single AF point on the person he wants and lets servo follow them as he recomposes. Servo first image priority is set to focus, so the camera waits for focus before taking the first frame.

Drive mode stays on single shots most of the time. In low light, at around 1/200 s with a fairly still subject, he takes a short burst to raise the odds of one sharp frame, and for fast-moving fashion work he switches to continuous shooting, usually at the low speed, since the R6 Mark III's 40 fps would leave him with hundreds of near-identical frames. The grid stays on to keep him thinking about composition, whether that's placing the eyes near the top third or leaving space in the direction someone is looking.

Picture styles only change the JPEG and the preview on the rear screen, so on set he uses Standard, Canon's punchiest style, because it looks great when he shows a frame to the model. Lightroom ignores that choice and typically opens raw files in Adobe Color, and he finds Adobe's profiles can make skin from Canon files look a little green. His fix is the camera-matching profiles: Standard for punch, Neutral as a flatter starting point he likes, Faithful for more accurate color with soft highlights, or Portrait, which he isn't a fan of. White balance stays on auto, except at golden hour, when he switches to the daylight preset so the warmth survives in the preview and the whole set starts from the same point in Lightroom.

Partway through the video, he shows a portrait and asks viewers to guess the aperture he used, a quick test of the instinct he recommends building.

Read Entire Article