2 weeks ago
21
Follow ZDNET: Add us as a preferred source on Google.
ZDNET's key takeaways
- Unplug at 100%, and keep the battery between 20% and 80%.
- Avoid draining to 0%; store unused tablets at 50%.
- Use certified chargers to prevent stress and overheating.
As someone who uses a tablet daily, I'm always looking for ways to extend its battery life. Some everyday habits can quietly wear down your battery over time, but a few simple changes can help it last much longer.
Most tablets offer six to eight hours of use on a single charge, though battery life diminishes with age and continued use. While there are many things you can do to conserve battery life, here are the ones you should avoid to ensure your battery's longevity.
1. Leaving your tablet plugged in overnight
This isn't always a problem with newer tablets, but most tablets on the market will suffer from being left plugged in overnight. Tablets typically charge to 100% and stop using electricity. However, leaving your tablet plugged in can cause it to continue trickle-charging, keeping the battery full, which can stress the battery over time and shorten its lifespan.
Instead, unplug your tablet when its battery reaches 100%. As a rule of thumb, it's best to keep your battery charged between 20% and 80%.
Like all the common charging mistakes we make with our tablets, leaving it plugged in overnight once or twice won't permanently damage it. Battery damage occurs when these incorrect practices become a habit.
2. Letting the battery drain to 0% (and forgetting it)
I've been guilty of letting my tablet's battery drain to 0%, then setting it aside and forgetting to charge it for a couple of days. Repeatedly letting your battery drain to 0% makes it age much faster, risking battery death and requiring a replacement or repair to revive it.
I've unfortunately learned this the hard way after leaving my discharged Nintendo Switch Lite in a drawer for a couple of months, only to learn that its battery had been irreparably damaged.
Also: 8 reasons why I replaced my Kindle with an iPad Mini for reading ebooks
Lithium-ion batteries are simply not meant to stay empty, so most tablets don't truly hit 0% when they shut down. Instead, they shut down with a little charge to protect the battery, which is why a low-battery screen appears when you try to turn them on. If you leave your tablet with a drained battery for days, weeks, or months, the battery continues to slowly discharge until the voltage drops too low, potentially damaging the battery's internal chemistry.
Repeatedly doing this results in a battery that is less able to hold a charge or, worse, incapable of recharging altogether.
To prevent this and prolong your battery's life, avoid letting the battery drop below 20%. If you won't use your tablet for some time, charge it to 50% capacity and shut it down before storing it.
3. Using the wrong charger
Your local dollar store may be a good spot to get party and craft supplies, but not electronics. No matter how enticing the idea of buying a $1 charger seems, it's probably best to avoid it. Using a cheap, non-certified, or incorrect charger for your tablet can deliver inconsistent power, overcharge it, or result in inefficient charging. All of these cause increased strain on your battery and a shorter lifespan.
Using the wrong charger on your battery can do more than simply prolong its charging time. If a charger's wattage isn't properly matched to the battery, it can overheat your device as it struggles to supply enough power, or even overload the tablet's circuits if it can't regulate the power draw. Cheap chargers can also deliver fluctuating voltage, which stresses the battery and wears out its chemistry.
Also: iPad Air (M4, 2026) review: I benchmarked Apple's tablet with the Pro model, and it's very close
Many certified chargers, like Apple-certified or USB-PD ones, have built-in safety measures that off-brand and cheap chargers skip. These measures prevent surges and overheating that could damage the battery and charging port.
When charging your tablet, it's best to look for a charger that is either certified or properly matched for your device, from the cable to the brick.
Trickle charging happens when your smartphone or tablet charges fully but remains plugged in, getting small amounts of electricity to keep its battery at 100%. If you plug in your tablet each night and it reaches 100%, its battery will lose a little charge over the course of the night, which triggers the charger to kick in to top it back up.
Keeping lithium-ion batteries charged at 100% for long periods can stress them and accelerate wear, especially if it becomes warm.
Also: Why your USB-C device won't charge - and what you can do instead
This is why many smartphone manufacturers have added a slow-charging feature when a device is plugged in overnight. Instead of quickly charging your battery to 100% and then topping it off for the rest of the night, your smartphone or tablet may take a few hours to reach 100%, closer to the morning. This extends the device's battery lifespan.
Chemical aging refers to the normal wear and tear that occurs in a lithium-ion battery during repeated charging and discharging cycles. Over time, the chemical reactions that occur inside lithium-ion batteries used in smartphones and tablets become less efficient, resulting in reduced capacity and slower performance -- this is called chemical aging.
There's no way to avoid chemical aging; it's simply the way lithium-ion batteries age, but you can slow it down. Chemical aging is sped up by doing what is outlined above, like plugging in your device overnight, letting the battery drop to 0% often, using cheap chargers, and exposing the device to heat.
English (US) ·